Online Catalogue

View Cart | Checkout | Recent Orders | Items:, Value:

spacer

Store Information

spacer
spacer

Best Sellers

Cuff Seals (per pai)

Cuff Seals (per pai)

Cuff Seals that glue on to the suit that form part of the Cuff Repair System.

find out more

10.00

Cuff Protectors

Cuff Protectors

Cuff-Protectors for the Polar Bear Quick-Change Cuff-Ring System© and Polar Grip Dry Gloves.

One Size

Supplied in pairs

find out more

2.51

Aquabond 2pt Adhesive

Aquabond 2pt Adhesive

Two part adhesive in 250ml tin plus 10ml bottle of accelerator.

Ideal for drysuit repairs such as neck and wrist seal replacements, patching, inflatable boat repairs, and for use on rubber and hypalon fabrics.

Sufficient quantity in 1 pack for a Neck Seal & one pair of Wrist Seals OR a couple of Pockets.

find out more

15.46

Q-Change Cuffs Heavy Duty

Q-Change Cuffs Heavy Duty

The Heavy Duty version of the Quick-change Cuff Seals for the Polar Bear Cuff-Ring System© & Polar Grip Dry Gloves.

No tools or adhesives required for fitting.

Available in a range of sizes.

Supplied in pairs

Keep all latex seals out of direct sunlight and any sources of ozone eg car fumes.

Cuff-Ring System : The replacement wrist seals are available in Small, Medium or Large. In the back of your suit will be an information plate and under Cuff Size you should find the size originally fitted.
If you can't find this information use the following as a guide:

Small = 12.5 - 16.50cm
Medium = 16.5 - 19.00cm
Large = 19.0cm +

Wash in clean water after use and dry before storing.

Regular application of Seal Saver™ preserves and maintains latex and neoprene seals while inhibiting oxidation and deterioration.

find out more

17.51

O Rings

O Rings

Retaining O Rings for the Polar Bear Quick-Change Cuff-Ring System© and Polar Grip Dry Gloves.

One Size

Supplied in pairs

find out more

4.00

Neck Seal Latex. Bellows Type

Neck Seal Latex. Bellows Type

Two part adhesive required for fitting.

Also available in Heavy Duty All replacement latex neck seals have grooves or rings around the neck edge. These are used as a guide when trimming the seal to the correct size.

Firstly, try on the untrimmed seal and decide whether or not it actually needs trimming. If you do decide to trim the seal use the rings as a guide. Using a sharp pair of scissors, start the cut at an angle to the first ring and trim as neatly as possible.

Only cut one ring at a time, then re-check the size. It is surprising how much difference a small amount taken off will make.

What size to order ? :

X/Small = up to 33cm
Small = 34 - 37.5cm
M/Std = 38 - 43cm
X/Large = 44.5cm+

Keep all latex seals out of direct sunlight and any sources of ozone eg car fumes.

Wash in clean water after use and dry before storing.

Regular application of Seal Saver™ preserves and maintains latex and neoprene seals while inhibiting oxidation and deterioration.

find out more

8.00

spacer
Welcome To Polar Bears - We are moving!

Welcome To Polar Bears - We are moving!

From June 2014 Polar Bears: Drysuit Manufacture & Repair Service will be based in Barnstaple, North Devon, home of sister company Reed Chillcheater Ltd
.
Have a look at Reed Chillcheater Limited now.

The move is part of an exciting & ongoing expansion plan, building on the strengths of both companies:
Polar Bears, renowned for its manufacture of dive suits, drysuits, surface water suits & world class suit repair service

Reed Chillcheater Ltd, internationally recognised as innovative manufacturers of protective garments for the rescue services, paddlers & the film industry.

Rest assured, the well-known & much-loved name of Polar Bears will live on and the expertise & service our customers enjoy will continue.

We are getting bigger and even better!!


To drop your repairs in person.
You are very welcome to drop in and see us in our new premises, we're planning a brand new showroom of Reed & Polar Bears gear in addition to offering a fully integrated repair service for all makes of dive suits, drysuits, wetsuits & paddle gear. All carried out in house, assuring you of repairs carried out to original manufacturer quality and standard.

Opening Hours: 9am to 5pm Monday to Friday

Please give us a call to let us know you're coming 01271 267277

By post or courier.
All repairs & orders should be sent to:
Reed Chillcheater Ltd, Chapel Street, Braunton, Devon EX33 1EL
Our email remains the same: repairs@polarbears.co.uk
Telephone: 01271 267277 www.chillcheater.com

Best Selling Items

Cuff Seals (per pai)

Cuff Seals (per pai)

10.00

Cuff Seals that glue on to the suit that form part of the Cuff Repair System.
find out more

Cuff Protectors

Cuff Protectors

2.51

Cuff-Protectors for the Polar Bear Quick-Change Cuff-Ring System© and Polar Grip Dry Gloves.

One Size

Supplied in pairs
find out more

Aquabond 2pt Adhesive

Aquabond 2pt Adhesive

15.46

Two part adhesive in 250ml tin plus 10ml bottle of accelerator.

Ideal for drysuit repairs such as neck and wrist seal replacements, patching, inflatable boat repairs, and for use on rubber and hypalon fabrics.

Sufficient quantity in 1 pack for a Neck Seal & one pair of Wrist Seals OR a couple of Pockets.
find out more

Q-Change Cuffs Heavy Duty

Q-Change Cuffs Heavy Duty

17.51

The Heavy Duty version of the Quick-change Cuff Seals for the Polar Bear Cuff-Ring System© & Polar Grip Dry Gloves.

No tools or adhesives required for fitting.

Available in a range of sizes.

Supplied in pairs

Keep all latex seals out of direct sunlight and any sources of ozone eg car fumes.

Cuff-Ring System : The replacement wrist seals are available in Small, Medium or Large. In the back of your suit will be an information plate and under Cuff Size you should find the size originally fitted.
If you can't find this information use the following as a guide:

Small = 12.5 - 16.50cm
Medium = 16.5 - 19.00cm
Large = 19.0cm +

Wash in clean water after use and dry before storing.

Regular application of Seal Saver™ preserves and maintains latex and neoprene seals while inhibiting oxidation and deterioration.
find out more

O Rings

O Rings

4.00

Retaining O Rings for the Polar Bear Quick-Change Cuff-Ring System© and Polar Grip Dry Gloves.

One Size

Supplied in pairs
find out more

Neck Seal Latex. Bellows Type

Neck Seal Latex. Bellows Type

8.00

Two part adhesive required for fitting.

Also available in Heavy Duty All replacement latex neck seals have grooves or rings around the neck edge. These are used as a guide when trimming the seal to the correct size.

Firstly, try on the untrimmed seal and decide whether or not it actually needs trimming. If you do decide to trim the seal use the rings as a guide. Using a sharp pair of scissors, start the cut at an angle to the first ring and trim as neatly as possible.

Only cut one ring at a time, then re-check the size. It is surprising how much difference a small amount taken off will make.

What size to order ? :

X/Small = up to 33cm
Small = 34 - 37.5cm
M/Std = 38 - 43cm
X/Large = 44.5cm+

Keep all latex seals out of direct sunlight and any sources of ozone eg car fumes.

Wash in clean water after use and dry before storing.

Regular application of Seal Saver™ preserves and maintains latex and neoprene seals while inhibiting oxidation and deterioration.
find out more


spacer
spacer